Phone:  (98) 21 6534 3759
Address:  No 110 , Naji Street , Ferarat , Shahriyar , Tehran , Iran

In all washing processes considerable water is used. This is not only costing but also the washing waste water contains fine grains and coarse grains particles which are harmful for environment.
Water processing is performed by this device and mud in water will be deposited and the water becomes clear.
Liquid separation from solid process is performed by gravity power and is used for clearing up solid – liquid dilute suspension in this device

Specifications

Equipped with a polymer coating on all surfaces exposed to abrasion.
Adjustable vibration system using two electric vibrators.
Pumps anti wear.
High washing capacity with a certain quality.

The device combines high quality manufacturing( production of sand for asphalt and concrete )and grinding of hard and soft minerals( silica,feldspar,zinc,dolomite,barite,…)have sufficient efficiency and complete crushing operation is performed on them.
It has been grinding stone for stone on stone that causes reduces internal wear of parts compared to similar devices and also the high percentage of breakage of materials is multifaceted.

Specifications

The use of technology grinding stone on stone is minimized the internal parts wear.
In the tour and parts in contact hordox 400 using direct metal mineralization to reduce the depreciation.
Using hammers with tungsten blades.
Low costs of repair and maintenance period.
Ease of opening and closing the door for periodic maintenance.

When washing the sand in sand washer shops along with fine grained muddy water usable and useful to the sand that is problem in the production.
Vibratory dryer separation of fine_grained task and add the product has the quality of materials produced to increase output by drying the materials prevents wasting water and ease the loading material.

Specifications

High production capacity
Polyurethane mesh with a mesh of 250 to 500 microns.
Adjustable vibration motors.
Ability to set and control water flow.
cyclone particle separator.

Avo wash is one of the world’s most modern machine for washing gravel and sand Dynamic separation procedures as a result of drift pebbles against muddy water output has resulted in quality wash and by maintaining fine grained sand would be desirable softness and quality materials.

Specifications

Equipped with a polymer coating on all surfaces exposed to abrasion.
Adjustable vibration system using two electric vibrators.
Pumps anti wear.
High washing capacity with a certain quality.

This machine is a cone crusher which can be used as the primary or the secondary stone crusher in the crushing department.
These stone crushers carry out the crushing operation through closing the gap between the mantle (which is located on the main shaft) and the concave (which is installed within the main body of the machine meaning on the top shell) this groove is opened and closed by the eccentric which is located on the bottom of the main shaft and causes the main shaft to rotate. The output load size power can be changed according necessities through a change in the type (the gap between the mantle and the concave) by using the lifting jack.
This stone crusher is installed on its chassis along with its hydraulic oil tank and its cooler. The electrical panel of the machine can be used automatically and manually as well and the performance of the machine can be controlled through this electrical panel.  

Specifications

Used as primary and secondary stone crusher in mines
Capable of crushing very hard rocks
A strong structure and resistant in crushing stones
The triturating parts are made of magnesium
High efficiency and decreased maintenance cost with three automatic oiling systems
Water and oil- based cooling system 

   

No Description

..

This machine is designed for crushing aggregates exited from secondary stone crushers and turning it to the finer grading. This machine is suggested in Stone Crushing Departments which have soft structure stones.
The inlet size of this machine is measured 60mm and the outlet load is turned into broken granules with polyhedral shapes using rotary and aggregate throwing system and contacting with the anvils designed beside the wall.

Specifications:

Equipped with lateral three doors for easy repair and maintenance services
Equipped with resistant shaft and axis with high vulnerability
Equipped with similar multifaceted liners
Equipped with hammers manufactured from manganese and anti-erosion steel
Possibility of operating in two different directions

 

 

This machine is designed suitably for uniform and controllable feeding of raw materials with proper dimension. This machine is regarded as the best option for iron ore, mountain rocks, gypsum, and pumice-stone industries and other materials due to owning liner in contact with materials.
Appropriate feeding and its high capacity is the other salient advantages of this machine.

Specifications:

Equipped with strong and resistant chassis and body,
High capacity of storage fennel
Using changeable and replaceable liner in points under body abrasion and fennel
Equipped with bearing and strengthened axis with gearbox for operating in arduous and difficult conditions,
Capability of adjusting range of oscillation and efficiency of the machine,

 

 

This machine is designed properly for uniform and controllable feeding of raw materials and is applicable in gypsum, pumice stone, sand and gravel industries and also other minerals.
It should be noted that grizzly feeder is produced at Mahan Sanat Company in various single-axis and biaxial forms with vibrating engine.

Specifications:

Using replaceable and exchangeable liner at abrasive- prone points,
Isolating tiny granules with the capability of adjusting
Equipped with bearing and strong axis for operating in hard and difficult conditions,
Capability of adjusting range of oscillation and efficiency of the machine,
Regulating and replaceable combs in grizzly part

This machine is designed for isolating tiny and granulated materials from the stone and is usually applied after feeder for optimal use of capacity of jaw-shaped stone crushers. In general, gizzly screen utilizes capacity of stone crusher maximally.

Specifications:

Equipped with regulating range of vibration,
Equipped with strong configuration with high resistance,
Equipped with anti-abrasive for guiding and granulating load with capability of changing “V” of network
Equipped with rotor with steel shaft and roll bearings with easy repairing and maintaining capability

 

 

From among other stone crushing devices, this machine is regarded as the first stone crushers which is responsible for breaking or crushing large-size stones and converting them into the smaller sizes. In addition, this machine is equipped with secondary stone crushers.
It should be noted that this machine is applicable in cement, iron ore, gypsum, salt stone, sand and gravel and other industries.

Specifications:

Equipped with high production rate of crushing stone,
Low depreciation rate due to use of manganese steel in abrasive parts,
Equipped with strong body and structure with high resistance,
Equipped with rotor with two roll-bearing lines and strong steel bearing
Equipped with regulating system, hydraulic mouthpiece with the capability of controlling size of outlet materials,

 

 

Due to its inexpensive and cost-effectiveness feature, this machine is used for transferring or conveying materials mostly.
This machine also can be installed from 0 to 18 degrees with ordinary rubber and also up to 35 degrees with corrugated rubber. (Of course, it depends on the type of materials that is supposed to be transported by the machine.)
Conveyor belt can be used in long routes ranging from one to several kilometers.
In terms of width, there is not any limitation for this machine. Depending on the conveyance capacity, this machine can be used in different widths.
It should be noted that this machine is regarded as inseparable and integral part of systems for conveying materials.

Specifications:

As feeder of raw materials, feeders are used in different units in general. In other words, vibrating feeder is regarded as one of the best options for controlling and feeding materials in secondary stone crushers.
Simple structure with the capability of increase of storage volume is considered as salient advantage of this machine.

 

 

Due to its inexpensive and cost-effectiveness feature, this machine is used for transferring or conveying materials mostly.
This machine also can be installed from 0 to 18 degrees with ordinary rubber and also up to 35 degrees with corrugated rubber. (Of course, it depends on the type of materials that is supposed to be transported by the machine.)
Conveyor belt can be used in long routes ranging from one to several kilometers.
In terms of width, there is not any limitation for this machine. Depending on the conveyance capacity, this machine can be used in different widths.
It should be noted that this machine is regarded as inseparable and integral part of systems for conveying materials.

Specifications:

Equipped with strong chassis made with iron beam – U-shape iron,
Equipped with coated tug rollers for increasing depreciation
Equipped with belt regulating system
Using repairable rollicks with high IP,

 

 

This device is regarded as one of the simplest and low-depreciation machines for isolating and grading materials required by different industries such as sand and gravel, gypsum, cement, iron ore and pumice stone industries. In addition, this device is used by other industries which require grading of their raw materials.
With due observance to the type of materials and its density, this prestigious company produces screen device in various types and models with special structure. Moreover, the company expresses its readiness to offer the device to the dear customers.

Specifications:

Using nuts and bolts in all connections for preventing breakage due to the tension,
Equipped with internal axis with strong bearing, equipped with steel shaft and roll bearing
Equipped with oily and greasy lubricating system
Easy installable and changeable net
Equipped with strong floors using proper steel sections
Capability of regulating range of oscillation

 

 

This device is of the secondary stone crusher with horizontal axis and is used in converting materials into the smaller size with the dimension of maximum 100 mm.
With stone is entered the device, stone are contacted to the wall of anvils designed inside the device using moment as a result of revolving of rotor, and then, stones are turned into the smaller sizes.
This type of device is produced in different sizes in two forms of normal and hoist with jack.
Parts can be changed easily in the device which is equipped with hoist jack.

Specifications:

Equipped with main shaft and rotor of disc type made of steel with changeable coatings,
Equipped with proper bearing for easy revolving of horizontal axis,
Using anti-abrasive steel in abrasive parts,
Rotor of the device is machinated with high precision.
Using similar liners for easy supply of parts,

 

 

As a secondary stone crusher, this machine is used in various units for breaking or crushing materials. Combination of a secondary and primary stone crusher due to the capability of receiving entrance load is regarded as one of the salient properties of this stone crusher.
Production of materials with breakage percentage (0 – 6) is the other salient advantage of this stone crusher. Since this device is equipped with three lines of anvils, it is regulating in its surrounding rotor.

Specifications:

Using anti-abrasive steel in abrasive parts,
Equipped with heavy rotor and axis with the high vulnerabilities,
Equipped with two-sided hammers for optimal use of them,
Equipped with integrated anti-abrasive overhead anvil with high vulnerabilities,
Equipped with hydraulic door system for each repair and maintenance
Equipped with anti-abrasive funnel

 

 

 

This machine is suitable for washing aggregates exited from various units tasked with producing materials.
With creating rotary movement in specific angle at the pond, this machine causes mud to be separated from aggregates in order to boost quality of the produced materials.
According to the request of customers, this device is produced and manufactured by Mahan Sanat Company in different sizes and dimensions.

Specifications:

Equipped with strong body with specific designing for prevention of abrasion
Equipped with large pond for storing water
Equipped with bearing with suitable and proper sealing system
Equipped with internal blades with rubber coating in order to prevent abrasion
Equipped with gearbox and strong power transmission system

 

 

In most of mines, extracted aggregates include soil and mud, so that production of materials with high quality requires separating this soil. Scrubber is regarded as one of the best options for washing large-size aggregates for separation of mud and soil.
Mud and soil stuck on the materials are separated from each other by this device.

Specifications:

Tubular body made of anti-abrasive sheet,
Equipped with anti-abrasive and replaceable internal blades,
Equipped with steel rings and rollers,
Equipped with chain power transmission system
Equipped with preservatives for prevention of longitudinal motion

 

 
quick access
Stone Crusher
Two Sided Sand washer
Horizontal Feeder
Grizzly Feeder
Grizzly Screen
Jaw Crusher
Vibreting feeder
Conveyor Belt
Screen
Impact Crusher N.S
Impact Crusher H.S
Screw Sand Washer
Scrubber
Thickener
Crusher Centrifuges
Vibratory Dryer
Dynamic Labelling Sand
Hydrocarbon
Download Catalog